The advantage of machine tool castings

The most common casting method for Machine Tool Castings is sand casting. 

Advantage

1. The resin sand mold has good rigidity. In the initial stage of casting, the sand mold can be used for the graphitization shrinkage of the cast iron coagulation process, effectively eliminating shrinkage holes and shrinkage porosity defects, and completing the casting of gray cast iron and ductile iron with less risers and no risers.

2. In the production of solid mold casting, polystyrene foam is used for modeling with furosemide resin self-hardening sand. When the molten metal is poured into the mold, the surface of the foamed plastic is vaporized under the action of the low-temperature molten metal, extinguished and disappears.

3. In comparison, vanishing mold casting has great advantages over traditional sand molds for the production of single or small batches of automotive cover parts, machine tool base Castings and other large molds. It not only saves the cost of expensive wood molds, but also is easy to operate. , prolongs the production cycle, improves the production efficiency, and has the advantages of good dimensional accuracy, small machining allowance, and good appearance quality.